1978 CLAUSING-COLCH

Block Gap Bed Lathe equipped with a 10 H.P., 3 phase, 60 cycle
A.C. main motor and controls having the following general
specifications:

SPECIFICATIONS:
Actual swing over bed, 17-1/4"
Swing thru gap, 28"
Width of gap, 8-1/2"
Swing over cross slide, 10-1/2"
D-1-8" Camlock spindle nose
Hole thru spindle, 3-1/16"
16 Spindle speeds, 20 to 1600 RPM
38 Inch thread, 2 to 72 TPI
40 Metric threads, .4 to 14mm
Longitudinal feeds, .002" to .032" IPR
No. 5 Morse taper centers
Width of bed, 13-1/2"
Hardened and ground bedways
Floor space: 4'x13'x4' high
Weight approximately: 7000 lbs.

EQUIPMENT:
12" 3-Jaw chuck, 9" 3-Jaw roller type steady rest, chip pan
and coolant, taper attachment.

Serial Number: 77023/12204 - Built 1978

F.O.B. Truck East Boston, Massachusetts