HARDINGE

equipped with a 1.5 H.P., 3 phase, 60 cycle, 220 volts main
drive motor and controls having the following general
specifications:

SPECIFICATIONS:
Actual swing over bed, 11"
Swing over cross slide, 6"
Hole thru spindle, 1-1/4"
Hardinge taper key spindle nose
No. 2 Morse taper in tailstock
Variable spindle drive, 125 to 3000 RPM
Power feed changes from 1/4" to 7" per minute
27 Thread changes, 11 to 108 TPI
Width of bed, 5"
Weight approximately: 1700 lbs.

EQUIPMENT:
Lever operated collet closer, miscellaneous collets,
Trav-a-dial, and coolant pump.

Serial Number: 2581-3

F.O.B. Truck East Boston, Massachusetts