Sold
BORING MILLS, VERT. (Including Vert. Turret Lathes)
Manufacturer:
BULLARD
Year:
1953
Stock #:
518
42" BULLARD "CUTMASTER" Vertical Boring Mill equipped with 3 heads and a 30 H.P. 3 phase, 60 cycle A.C. main motor and controls having the following general specifications:
Capacity42"1,066.8 mm

SPECIFICATIONS:
Diameter of 3-Jaw chuck, 42"
Maximum swing with side head down, 54"
Maximum swing with side head in working position, 45"
Maximum distance under cross rail, 37"
Maximum distance under turret face or ram 48-1/4"
Ram and turret heads travel, 30-3/8"
Ram and turret heads swivel, 60 degrees
Side head travel, 20"
Vertical travel of side head, 37-1/4"
Power rapid traverse to all heads in all directions
20 Table speeds, 4.1 to 150 RPM
16 Feeds .0026 to .500 I.P.R.
Floor space: 9'x9'x10' high
Weight Approximately: 41,500 lbs.

EQUIPMENT:
Pendant control, swiveling 5 position manual indexing turret head,
left hand swivel ram head, 4 position side head, 3-jaw combination
chuck. Threading attachment less change gears.

Serial Number: 27197 - Built 1953

F.O.B. Truck East Boston, Massachusetts

Loading...